The condenser is also referred to as “air cooler” in the Use & Care Guide. 1. Unlock and open the maintenance cover at the bottom of the unit next to the vent. 2. Move both locking levers toward each other and pull out the condenser. 3. Clean the condenser in warm water and drain completely. 4. Reinsert the condenser into the dryer and lock both levers. 5. Close the maintenance cover. 6. The condenser should be cleaned 3-4 times a year for optimal performance.
Wipe the housing with a soft cloth and soapy water only. Rinse and then dry. Wipe the control panel with a damp cloth.
Wipe the drum, door seal and inside of the door with a damp cloth only.
Run the lint filter under warm water and gently scrub with your fingertips or a soft brush. This should be done monthly. Dry with a soft cloth and reinsert into the housing.
Lint and small debris may accumulate in the lower portion of the lint filter opening. The lint and small debris can be removed with a vacuum cleaner using a cleaning tool that can reach into narrow crevices.
1. Locate the sensor. They are the two bars right next to the lint filter. 2. Wipe the sensor with a soft cloth and a tiny bit of white vinegar. Only white vinegar can be used. 3. The sensor should be cleaned once a month for optimal performance.
Let our appliance experts guide you from the comfort of your home. Book a phone or video consultation with a Siemens appliance expert, who will call you from the Home of Innovation, our Siemens Showroom.*
To note, nothing is priced in the Home of Innovation, please refer to your local electrical retailer or kitchen supplier for accurate pricing
We are delighted to offer face to face, video and phone product advice appointments. For the health and safety of our customers and staff, we ask you to keep to a maximum of 2 people per appointment.
