Above washbasin device, Closed (Pressure-proof)

Hydraulically controlled small instantaneous water heater - with tube heating element.

  • Small instantaneous water heater, 6,0kW, 220-240V, hydraulically controlled, over wash basin device.
  • No standby energy consumption — only uses energy when hot water is needed.
  • Because of a special heating element (tube heating element) the device is very robust and suitable for use with all water types.
  • Small and attraktive design. Very easy to install. Wire directly into mains.
  • ICON_IP24D

    Shock/moisture protection to IP 24D.

    Spray water protection guarantees easy

    installation, even in the bathroom.

  • ICON_GEPRUEFTESICHERHEIT

    Safety-tested.

    Proof of device safety via independent VDE testing institute.

  • ICON_EXTRATOUGH

Basic information DH06111

  • Nominal power (kW)
    6 kW
  • Current (A)
    32 A
  • Warm water output with 12°C inlet temperature: 38°C
    3.00
  • Minimum to maximum inlet temperature (C°)
    4 - 20 GC °C
  • Dimensions of the product (mm)
    235 x 144 x 100 mm

More technical information

Product details

  • Pressurised construction, therefore can be connected to industry standard pressurised fittings
  • with spray regulator to optimize the water spray
  • suitable for kitchen sink / wash stand
  • Operation indicator light
  • Hot water rating (38 °C) 3 l/min
  • Low switch-on flow rate of 2.3 l/min
  • fixed connection, rating: 6 kW
  • Dimensions (H x W x D): 23.5 x 14.4 x 10 cm
  • Fixing materialMounting template, Wall plugs, Screws
  • Special accessories: NO_VALUE

Technical information

Connection

  • Brand
    Siemens
  • Product name / Commercial code
    DH06111
  • Depth (mm)
    100 mm
  • EAN code
    4,242,003,314,241
  • Height (mm)
    235 mm
  • Width (mm)
    144 mm

Construction type

  • Design
    Closed (Pressure-proof)
  • Color / Material panel
    night blue
  • Appliance type
    instant.electric.water heater
  • Heating type
    Tubular heater
  • Material heating element
    Copper
  • Suitable material water outlet pipes
    Copper, Steel
  • Suitable material water inlet pipes
    Copper, Steel
  • Installation type
    Above washbasin
  • Installed filter
  • Flow control
    Mechanical flow limitation
  • Control type of heat output
    Hydraulic
  • plugin

Safety

  • Shock / moisture protection
    IP24D
  • Safety device
    Safety temperature limitation
  • Temperature limitation as child safety

Mains connection

  • Current (A)
    32 A
  • Electrical connection (Type of connection)
    1~/N/PE
  • Cable entry into appliance
    From rear, Side
  • Recommended cable cross-section (mm2)
    4.0
  • Nominal power (kW)
    6 kW
  • Nominal current
    26.0 A
  • Plug type
    fixed connection
  • Nominal power (kW)
    220-240 V

Technical details

  • Connection, thread, water outlet pipes (inches)
    1/2
  • Connection, thread, water inlet pipes (inches)
    1/2
  • ON flow rate (l/min)
    2.30
  • Nominal pressure (water) (bar)
    10 bar
  • Water connection
    Surface connection
  • Minimum to maximum inlet temperature (C°)
    4 - 20 GC °C

Comfort

  • Energy-saving position
  • Anti-calc system
    No descaling required
  • Noise class
    I
  • Power on/off indicator
    Indicator light
  • Total number of power settings (manual/automat.)
    1
  • Warm water output with 12°C inlet temperature: 38°C
    3.00

Highlights

Geprüfte Sicherheit.

Proof of device safety via independent VDE testing institute.

Shock/moisture protection to IP 24D.

Spray water protection guarantees easy

installation, even in the bathroom.

Operating instructions

Image

You can find user manuals for this product here.

Operating/installations instructions

Product sheet

Line drawings

Please note the additional info for user manuals.