Error code E17 / F17: Water supply time exceeded
Water supply is impaired.
Check the water pressure directly on the tap using a bucket. Approximately 10 litres of water per minute must flow out of the fully open tap. Contact your fitter if the water pressure is too low.
Please additionally check filters in the water connection of the supply or whether AquaStop hose blocked.
Clean filters in the water supply hose.
Attention: AquaStop safety device contains an electric valve, do not immerse in water.
- Turn the tap off.
- Take the hose off the tap.
- Clean the filters using a small brush.
- In the case of appliances without an AquaStop, also remove the hose from the back of the appliance. Take out the filter with pliers and clean it.
- Reconnect the hose and check it for leaks.
If the error can’t be rectified, please contact Siemens Service and arrange a service appointment. You can reach Siemens Service 24h/ seven days a week by phone. Or use the online appointment booking service.