Skip to content
Siemens Home Appliances
Log in / Register
Ventilation Alt Text Placeholder

Extractor hoods

Intelligent technology. Powerful performance. For every type of kitchen.

A breath of fresh air for those who demand perfection

Whether wall-mounted, hung over an island, integrated into a hob, or hidden in the counter, our state-of-the-art ventilation systems and cooker hoods provide a quiet and steam-free space to help you achieve your culinary goals. Discover distinctive designs and powerful performance for every kitchen layout in the Siemens ventilation range.

Siemens ventilation with remote control & filter saturation

Always in control with Home Connect

Home Connect lets you monitor and control the extraction settings via your smart phone or smart assistant. You can even check the status of the grease and carbon filters, and get reminders when its time to clean or replace them.

Siemens ventilation with climateControl Sensor

Senses bad odours

The intelligent climateControl Sensor detects steam intensity and grease content and automatically adjusts the extraction rate to ensure the air in your kitchen stays clean and fresh at all times.

Siemens ventilation with high extraction rate – low noise

Quiet performance. For extraction without distraction

Thanks to our innovative iQdrive motor, selected Siemens hoods and ventilators are among the quietest products on the market. Intelligent sensors automatically adjust the extraction rate to reduce the noise levels and ensure optimal performance.

What to consider when buying a hood

Ductless vs exhaust air system

Ductless hoods (also called re-circulation and non-vented hoods) work by sucking in air, cleaning it through filters, and circulating air back into the kitchen. They are highly flexible as they can be easily installed, anywhere.

Exhaust air hoods (also called vented hoods) direct the hot air outside your home via a vent. They are generally more efficient, quieter and easier to maintain since they don't require a filter. However, they must be professionally installed.

Extraction rate

The extraction rate refers to how much air gets filtered in an hour. This is measured in cubic meters per hour (m³/h). Ideally, all the air in your kitchen should be filtered approximately 10 times per hour. Therefore, the recommended extraction rate will varies depending on the size of your kitchen.

For those who want to know it in detail: You can calculate the optimal extraction rate for your exact needs by multiplying the width, length, and height of your kitchen to get the total cubic meters, and then multiplying that number by 8 and add 200 (W x L x H x 8 + 200).

Noise level

Usually, the more powerful the cooker hood, the higher the noise emissions – but Siemens hoods are built for maximum performance with minimal noise. Our quietest models produce just 41 decibels of sound during normal operation, and 53 decibels at maximum power – well below average. The actual volume development of the respective model always depends on the type of installation, the pipework and the filter.

The climateControl sensor helps keep noise (and energy consumption) as low as possible by adjusting the power level to the amount of steam and grease in the air. Our iQdrive motor is not only powerful but also extremely quiet, thanks to its brush-less design. Don't compromise between performance and noise-level comfort with Siemens ventilation systems.

Filter types and maintenance

There are three main types of extractor hood filters; fleece filters, metal grease filters and odor filters (also called activated carbon filters).

With the cleanAir Plus filter, a very high amount of odors are filtered out of the air – so unpleasant fish smells are a thing of the past. In addition: An extremely high amount of airborne pollen and deactivated allergens are also trapped by the filter. The cleanAir Plus filter usually has to be changed every 12 to 18 months.

Our regenerable long-life odor filter neutralize over 80% of odors, while convincing with 10 years of full performance thanks to the possibility of regeneration as it can be easily cleaned in the oven at 200°C every 4 months.

Activated carbon filters need to be changed when they become saturated. This is usually the case after 6 to 12 months for the standard activated carbon filters

Installation and assembly

The installation and assembly requirements depend on which type of extractor system you have: vented (exhaust) or ductless (recirculating).

For a vented system, you will need to have access to the outside of the building. Suitable exhaust air piping must be installed between the extractor hood and the outlet in order to transport the extracted air outside as efficiently as possible.

For a recirculation system, all you will need is a socket and our recirculation set, which contains the activated carbon filter and other necessary items.

Why choose Siemens Home Appliances?

Perfect built-in solutions
German engineering excellence
Striving for sustainable progress 
Awarded design

Design your dream kitchen

Siemens hobs - Get more with My Siemens.

Get more with My Siemens

Join now to get an extra 10% discount on appliance promotion price at Siemens Home Appliances eShop and Experience Centre.

Already own a Siemens appliance? Register now to enjoy personalised services.

• Easy access to your appliance information

• All offers, services and fitting accessories for your appliances

• Extended warranty options

Register now