Skip to content

Product categoryCooking

Product groupCooker hoods

First aid

How do I clean the activated carbon/charcoal filters in my hood?

Solution

Activated carbon/charcoal filters cannot be cleaned or washed – they must be replaced. Activated Carbon Filters are used to neutralise odours when your hood is recirculating air around the kitchen. Carbon filters should be replaced when they are noticeably dirty or discolored (usually every 6 to 12 months, depending on hood usage). Tested and approved filters can be ordered directly from us.<br/>

Was this information helpful to you? Yes No

How do I clean the anodised aluminum surfaces on my extractor hood?

Solution

Wash with hot, soapy water, then rinse and dry. Mild detergents and cleaning agents are acceptable. Do not use powdered cleaners, abrasive cleaners, scrubbers, or steel wool pads.

Was this information helpful to you? Yes No

How do I clean the metal grease filter in my extractor hood?

Solution

Remove the filters according to the instructions in the Use & Care Guide. Drain and wipe all excess grease with a dry paper towel. Soak the filters in hot water and detergent and gently brush in the water to loosen food particles. Do not use products containing ammonia, abrasives or oven cleaners. Rinse the filters and let them dry before placing in the extractor hood. Filters may also be cleaned in an automatic dishwasher (please do not include any other items or cutlery in the wash). Washing the filters in a dishwasher may result in slight discoloration. You can spray them beforehand with our tested and approved Degreaser for even better results. We recommend grease filters be cleaned every 1-3 months depending on usage.

Was this information helpful to you? Yes No

How do I clean the painted surfaces on my extractor hood?

Solution

Wash with hot soapy water, rinse and then dry. Do not use powder cleaning agents, steel wool pads, oven cleaners or other abrasive cleaning materials.

Was this information helpful to you? Yes No

How do I clean the plastic surfaces on my extractor hood?

Solution

Wipe with a damp, soapy sponge or cloth, then rinse.

Was this information helpful to you? Yes No

How do I clean the stainless steel surfaces on my extractor hood?

Solution

Wipe with the grain when cleaning stainless steel. Use a mild, non-abrasive cleaning agent or stainless steel cleaner with a soft cloth. Wipe dry to avoid water marks. Warning: Some stainless steel cleaners are known to have negative effects on materials other than stainless steel. Make sure to apply stainless steel cleaner to stainless steel components only! Tested and approved Stainless steel conditioning cloths and cleaner can be ordered from us. The cloths are food-safe and can be used on surfaces which are in contact with food.<br/>

Was this information helpful to you? Yes No

What do I have do consider when cleaning my extractor hood?

Solution

Wipe away grease stains, change carbon filters (for recirculating units only), and wash grease filters on a regular basis. <br/>Warning: Do not use the extractor hood without the filters in place or with grease-filled filters or surfaces. To avoid risk of fire and explosion, do not use flammable liquids or solvents. Always unplug or disconnect the appliance from the power supply before servicing. Always be sure the entire hood (including filters and light bulbs) has cooled and grease has solidified before attempting to clean any part of the appliance.<br/>The efficiency of the extractor hood depends on the cleanliness of the intake and filters. Cleaning frequency depends on the frequency and type of cooking.

Was this information helpful to you? Yes No