Cleaning the filter in the water inflow to your washing machine

Observe the information on safety and preventing material damage.

Have you noticed that the water inflow on your Siemens washing machine has become weaker? One frequently overlooked cause may be the key to solving the problem: clean the filter in the water inflow if it is blocked or if the water pressure is too low. Regularly clean the filter of the washing machine in the water inlet hose. We show you the simple steps to follow to ensure your appliance runs smoothly.

Emptying the water inlet hose of the Siemens washing machine

In order to clean the filter, first empty the water inlet hose of the Siemens washing machine.

  1. Turn off the tap.

  2. Set a programme, except for Rinse , Spin or a draining programme.

  3. Start the programme and leave it to run for approx. 40 seconds.

  4. Switch off the appliance.

  5. Disconnect the appliance's mains plug from the power supply.

Cleaning the filter in the aquaStop hose

Note:

Observe the information on safety and preventing material damage.

Requirement:
The water inlet hose is empty.
  1. Remove the water inlet hose from the tap.

    st4image
  2. Clean the filter with a small brush.

    st4image
  3. Connect the water inlet hose and check for leaks.

    st4image

Was this article helpful?

Thank you for your feedback.

Thank you for your response. Please let us know how we can improve the article.