The laundry in the Siemens washing machine is too wet
Have you noticed that your laundry is still too wet despite the Siemens washing machine running the spin cycle? That can be quite frustrating when you're expecting fresh clothes. Our guide explains what could be causing it and how you can improve your washing results. Before you know it, your laundry will be leaving the machine exactly how you expect.
A low spin speed is selected.
-
Start the Spin programme.
-
The next time you run a wash cycle, set a higher spin speed.
The appliance is using a reduced spin speed to eliminate an imbalance.
-
Redistribute the laundry in the drum.
-
Start the Spin programme.
-
Prepare your laundry so as to rule out any imbalance.
-
Wash large and small items of laundry together
-
Load the laundry unfolded into the drum
-
Less Ironing is activated.
The drain pump is blocked or the pump cover is not installed correctly.
Drain pipe or water outlet hose is blocked.
If the water outlet hose at the siphon is dirty or the detergent solution is not being pumped out, you must clean these.
-
Switch off the appliance.
-
Disconnect the appliance's mains plug from the power supply.
-
Loosen the hose clamp and carefully remove the water outlet hose.
Residual water may leak out.
-
Clean the water outlet hose and siphon connecting piece.
-
Reattach the water outlet hose and secure the connection point using the hose clamp.
Was this article helpful?
Thank you for your feedback.
Thank you for your response. Please let us know how we can improve the article.