Preventing material damage

st4safety ATTENTION!
  • The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent.
  • Follow the dosage recommendations from the manufacturer.
  • Exceeding the maximum load capacity impairs the function of the appliance.
  • Observe the maximum load capacity for each programme and do not exceed it. Programmes
  • The appliance is secured for transportation using transit bolts.
Transit bolts which have not been removed may result in material damage and damage to the appliance.
  • Before starting up the appliance, remove the transit bolts completely and keep them in a safe place.
  • Before transport, fit the transit bolts fully in order to prevent damage in transit.
  • Material damage may be caused if the water inlet hose is connected incorrectly.
  • Tighten the screw connections on the water inlet until they are hand-tight.
  • Connect the water inlet hose directly to the water tap, without any additional connecting elements such as adapters, extensions or valves.
  • Make sure that the valve housing for the water inlet hose does not come into contact with its surroundings and is not subjected to any external forces.
  • Ensure that the inner diameter of the water tap is at least 17 mm.
  • Make sure that the length of the thread on the connection to the water tap is at least 10 mm.
  • If the water pressure is too high or too low, the appliance may not be able to operate properly.
  • Ensure that the water pressure in the water supply system is at least 100 kPa (1 bar) and max. 1000 kPa (10 bar).
  • If the water pressure exceeds the maximum value specified, a pressure-reducing valve must be installed between the drinking water connection and the hose set of the appliance.
  • Do not connect the appliance to the mixer tap of an unpressurised hot-water boiler.
  • Modified or damaged water hoses may result in material damage and damage to the appliance.
  • Never kink, crush, modify or cut through water hoses.
  • Only use the water hoses supplied with the appliance or genuine spare hoses.
  • Never re-use water hoses that have been used before.
  • Operating the appliance using water that is dirty or too hot may lead to material damage and damage to the appliance.
  • Only operate the appliance with cold mains water.
  • Unsuitable cleaning products may damage the surfaces of the appliance.
  • Do not use harsh or abrasive detergents.
  • Do not use cleaning products with a high alcohol content.
  • Do not use hard scouring pads or cleaning sponges.
  • Clean the appliance with nothing but water and a soft, damp cloth.
  • Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.

Was this article helpful?

Thank you for your feedback.

Thank you for your response. Please let us know how we can improve the article.